Fig. 7-2 The self-regulating double-pump

Identification of parts: point and click on figure or, see text

2 [top] septal membrane at chamber L
3. [top] septal membrane at chamber R
13. [top] RV-wall membrane
21. [top]expansion vessel at right inlet
22. [top]expansion vessel at left inlet
31. [top] valve used for water filling and air reducing of the activating volume, LV
61.[top] septal membrane at chamber R displacement limiting means (Cu-gauze)
64. [top] valve for ASD-simulation
65. [top] valve for VSD-simulation
66.[top] valve for DA-simulation
67.[top] wedge for TI-simulation and V-formed restricting means for TS-simulation
69. [top] wedge for PI-simulation and V-formed restricting means for PS-simulation
70.[top] SV activation pressure transducer (PAC-SV)
71. [top]pressurised air cylinder (PAC)
73. [top] RV activation pressure transducer (PAC-RV)
74. [top] LV activation pressure transducer (PAC-LV)
75. [top] RV activation pressurised unit transducing membrane
76. [top] chamber L inlet
77. [top]chamber R inlet
78. [top] chamber L outlet
79 [top]chamber R outlet
TV [top] "tricuspid valve", one-way valve at inlet of room R
PV [top] "pulmonic valve", one-way valve at outlet of room R